Inicio Productos Productos Hotowell Gestión hotelera aire acondicionado ahorro de energía energía ahorro de energía
Gestión hotelera aire acondicionado ahorro de energía energía ahorro de energía
Gestión hotelera aire acondicionado ahorro de energía energía ahorro de energía Gestión hotelera aire acondicionado ahorro de energía energía ahorro de energía Gestión hotelera aire acondicionado ahorro de energía energía ahorro de energía Gestión hotelera aire acondicionado ahorro de energía energía ahorro de energía Gestión hotelera aire acondicionado ahorro de energía energía ahorro de energía

Gestión hotelera aire acondicionado ahorro de energía energía ahorro de energía

Identificación del producto : HTW-ES6201
Etiquetas del producto : Sistema de ocupación hotelera
Atributos del producto :

HTW-61-ES6201 está diseñado para controlar el consumo eléctrico mediante la detección de presencia ocupada/desocupada, con el fin de conectar/desconectar los equipos de aire acondicionado e iluminación automáticamente cuando el cliente accede o sale de la habitación.

Descripción del producto
Product Description

Gestión hotelera aire acondicionado ahorro de energía energía ahorro de energía

 

>>General.

HTW-61-ES6201 is designed to control electrical consumption by detecting occupied/unoccupied presence, in order to connect/disconnect the air conditioning equipment and lighting automatically when the customer accesses or leaves the room.

 

 

>> PIR presence detector operating algorithm

HTW-61-ES6201 has 1 input (E1) for a magnetic room contact placed on the doorframes of the room;1 input (E2) for a magnetic window contact placed on the window frames; 3 inputs(E3,E4,E5) for PIR presence detectors.

When the door of the room is open, the energy saving system is activated instantly, and feed the following three outputs:
S1-Air-conditioning output with anti-humidity mode;
S2-Air-conditioning/Lighting output with delay time;
S3-Lighting output with delay time;

Once the door is closed, the system will try to detect if there is movement within 3s~T4 in the room

during this time, if any PIR presence detectors indicates movement, the system will assume that there is presence in the room, then it will operate as an "Occupied" mode maintaining activate S1, S2 and S3 circuit. If no movement,the system initiates the programmed delay time and disconnect the various outputs.

>>Window Contact Algorithm

The magnetic window contact switch is connected to the terminals 12-13. When the contact is open, the output S1 will disconnect after 1min, until closing window contact again.

Power supply
100~250 VAC- 50/60Hz 5W
Inputs
E1,E2,E3,E4,E5,Non-Voltage switch
Outputs
S1,S2,S3 .....Relay output: 250V, 16A
Relay output:
 250V, 16A
Application
Company Profile
FAQ
Consulta en línea