Home Products Thermostats Fan Coil Thermostat Flush Mounted Rdf310 Series Air Conditioning Temperature Controller
Flush Mounted Rdf310 Series Air Conditioning Temperature Controller
Flush Mounted Rdf310 Series Air Conditioning Temperature Controller Flush Mounted Rdf310 Series Air Conditioning Temperature Controller Flush Mounted Rdf310 Series Air Conditioning Temperature Controller Flush Mounted Rdf310 Series Air Conditioning Temperature Controller Flush Mounted Rdf310 Series Air Conditioning Temperature Controller

Flush Mounted Rdf310 Series Air Conditioning Temperature Controller

Product ID : HTW-61-3000/RDF310.2MM
Product Attributes :

For controlling the room temperature in individual rooms and zones that are heated or cooled with 2-pipe fan coil units 

The thermostat controls…

>  3-speed fan

>  on/off valve actuator in a 2-pipe system 

>  Suitable for use in systems with continuous heating or cooling mode

>  manual heating/cooling changeover

Product Description

1513244464213130.png

HOTOWELL RDF310-Flush Mounted Thermostat RDF310 Series.pdf

 >> General                                                      

For controlling the room temperature in individual rooms and zones that are heated or cooled with 2-pipe fan coil units 

The thermostat controls…

>  3-speed fan

>  on/off valve actuator in a 2-pipe system 

>  Suitable for use in systems with continuous heating or cooling mode

>  manual heating/cooling changeover

>>Features                                                      

>  Output for on/off valve or 3-wire on/off valve actuator

>  3-speed fan control: Automatic or manual

>  Manual heating/cooling changeover or continuous Cooling only / Heating only

> Operating modes: Comfort, Protection

> Adjustable commissioning and control parameters

> Optional display of room temperature or setpoint

>  Minimum and maximum setpoint limitation

>  Display temperature in increments of 0.5  °C

> Operating voltage AC 230 V

> Mounting on recessed square conduit box, fixing centres 60.3 m

>>  Output Diagram                                         

1.jpg

>>  Dimensions                                            

2.jpg

>> Technical Parameter                                

Power supply

AC 230 V + 10/-15%50/60 Hz

Power consumption

Max. 4 VA

Outputs

Fan control Q1, Q2, Q3 - N   AC 230 V

Rating     5   mA…4(2) A

Switching differential

0.5...4 K (factory setting: 1 K)

Setpoint setting range

Comfort mode:20 °C

Protection (heating and cooling) modeOFF

Built-in room temperature sensor

Measuring range0…49 °C

Accuracy at 25 °C:<±0.5 K

Temperature calibration range:±3.0 K

Resolution of settings and display

Temperature setpoints: 0.5 °C

Current temperature value displayed: 0.5 °C

Operation

Temperature: 0 ...50 °C

Humidity: < 95% r.h


       Warning!

No internal line protection for supply lines to external consumers (Q1, Q2, Q3, Y11, Y12)

Risk of fire and injury due to short-circuits!

n   Adapt the line diameters as per local regulations to the rated value of the installed overcurrent protection device.

n   The AC 230 V mains supply line must have an external circuit breaker with a rated current of no more than 10 A.

n   Only valves rated for AC 230 V may be used.

n   Disconnect from supply before opening the cover

FAQ.jpg

Hotowell-manufacutring-capacity.jpg

FAQ1.jpg

Thermostat Manufacturer | Flush Mounted Thermostat | Chinese Thermostat Manufacturer 

Online Inquiry